2nd Public Release after 2 years!! These are all older mods of mine, some will not correspond to my current standards and will probably not meet yours either! But i still hope that you guys will enjoy these mods! This is the 2nd of them, so don’t be a dick, otherwise it might be the last one as well! Cheers.
THIS MOD WAS RELEASED FOR MY PATRONS IN MAY 2020!!!
► MORE VIPs AND EXCLUSIVES LIKE THIS ONE ON MY PATREON PAGE ◄
Outcome of the ⭐️Special Patron Program⭐️ and Requested by a Veteran Patron, Mr. Daniel Barrett here comes the… Shelby Chrysler Dodge Omni GLHS – Goes Like Hell S’more
1986 my birth year… This year, the GLH has been taken under the wing of Carroll Shelby. If you’ve been held incommunicado in a padded cell for the past few years, you might not know that Mr. Shelby is back in the car business and that this time he’s playing with Dodges. A new venture called Shelby Automobiles in Whittier, California, will produce some 500 GLHSs this year, which will be sold through Dodge dealers who sign up for Shelby franchises.
The transformation from the 146-hp GLH to the 175-hp GLHS begins with the addition of an air-to-air intercooler and a Shelby-designed intake manifold to the stock 2.2-liter Turbo II engine. The intercooler allows 12-psi maximum boost pressure, 3 psi more than the standard GLH has. As a result, the torque peak goes up from 168 to 175 pound-feet.
Further modifications include the installation of low-pressure gas-charged Koni shocks all around and an upgrade in the tire department from 195/50HR-15 Eagle GTs to 205/50VR-15 Eagle VR50 gatorbacks. Rear ride height is reduced about half an inch. The GLH’s standard one-inch front and five-eighths-inch rear anti-roll bars are left alone. The Shelby treatment also includes a tape package (you can always peel it off) and six-inch cast-aluminum Shelby Centurion wheels.
More Specific Specs and details on the caranddriver.com webpage!
Complete 3D HQ
A Few Tuning Parts
HQ Interior, Doorsills, Boot & Engine
Hands on Steeringwheel
Working Dials on Dash
Correct Seat Position for FPV & Passenger
Correct Window Tints
Compatible with all Tuning Rimpacks!!
And all other standarts… besides LODs
Install and Enjoy 😉
See Ya Soon Peeps.
Screens by: Asyr0n
Base Model: Turn10
Adapted & Rigged: Asyr0n
******** INSTALL IN README ********
Make sure to not miss my upcoming Patreon Exclusives by leaving a follow on the ►Asyr0n’s Workshop◄ Facebook page!!